yexiaobo 
chosen
注册日期: Nov 2001
来 自:
发贴数量: 1355 |
My favorite teaching material...
Bal看过的吧?? 呵呵.
Installing Windows 98, 2000, ME or XP
These instructions are applicable for all VIA chipset motherboards.
Please read the instructions first BEFORE you begin.You can download and print of a PDF version here.
1, Before starting visit the web site of your peripheral manufacturers and make sure you have the latest drivers as well as any VIA drivers you need. VIA drivers can be found here.
2, Also visit your motherboard manufacturers web site to make sure you have the most up to date BIOS or the BIOS most appropriate for your system set up.
3, Back up anything you want on your hard drive.
4, Turn off your PC.
5, Flash your BIOS if needed. There is a good guide on how to do this here. Although it is highly recommended to follow instructions from your specific motherboard manufacturer.
6, Take out all devices except the video card, processor, memory, CD-rom and primary hard drive.
7, Unplug any secondary hard drives, sound card, IDE zip drives, USB devices, adapters etc.
8, On boot-up press delete to enter your BIOS.
9, Load Optimal Defaults, sometimes called Performance Defaults.
10, Set your first boot device as CD-rom.
11, Disable any onboard peripheral devices that you do not intend to use. For example, if you have AC-97 sound but intend to use a third party sound card, disable onboard sound. If you have integrated video but use a third party video card, disable onboard VGA (etc).
12,Save and exit the BIOS.
13,Format your HDD, where you want to install your OS. This should be C drive.
14, If you are installing a new drive, you may also need to Fdisc it to set up the file system. Instructions on how to do this are provided with your OS or Hard Drives
15, For Win98, 2000, ME and XP, the OS will automatically boot from the CD-rom.
16, Follow the prompts to install the OS. When the OS has completed installing, reboot.
17,,,,,,,,,,,,,,,,,Install the latest VIA 4in1 drivers and reboot. Do this BEFORE any other drivers. If you have installed XP, you do not need to do this, unless you have a PM266 chipset (VIA's newest P4 integrated chipset).
18, Go back into your BIOS and change first boot device to your floppy drive.
19,Install your video card drivers or integrated video drivers and reboot.
20,Install integrated sound drivers if you are using integrated sound and reboot.
21, Install any other peripheral devices, rebooting after each install.
22, If you install a Sound Blaster Live, reboot and then reinstall the 4in1 drivers again and reboot. An explanation for this can be found here
23, Go to the drivers page on VIA Arena and read through Step 3 to make sure you have any other drivers you might need and reboot.
24, Go to the Microsoft Web site and install all patches and updates for your OS.
more:
http://www.viaarena.com/?PageID=3&faq=16&Search=
__________________
for fools rush in where angels fear to tread
向版主报告此贴 | IP地址: 已记录
|
声卡……
2002-07-23 07:12
